Dryer Error Codes Master List — LG, Samsung, Whirlpool, GE, Electrolux

Quick Answer

This guide covers everything you need to diagnose and fix dryer error codes master list — lg, samsung, whirlpool, ge, electrolux. We start with the easiest checks you can do in 2 minutes, then move to DIY repairs, and finally tell you exactly when to call a professional.

🔍 Step-by-Step Troubleshooting

Before touching anything internal, make sure your dryer is unplugged or the circuit breaker is OFF. Electric dryers use 240 volts — that can kill you. If you have a gas dryer and smell gas, stop and leave your home immediately.

Step 1: Check the Obvious (2 minutes)

Don’t skip this step — 30% of “broken dryer” calls are resolved here:

Power: Is the dryer actually plugged in? Test the outlet with another device.
Circuit breaker: Electric dryers use a 30A double-pole breaker. Check your electrical panel — half-tripped breakers are tricky.
Door latch: Open and close firmly. Most dryers won’t run with the door ajar.
Lint filter: Pull it out and clean it even if it looks clean. A clogged filter causes dozens of issues.

Step 2: Diagnose the System (5-10 minutes)

Now let’s get more specific. This guide narrows down the exact system causing your problem. Follow the symptom → cause → fix structure below.

Step 3: DIY Fix or Call a Pro?

We’ll tell you honestly which repairs you can do in your driveway, which need a multimeter, and which require a licensed technician (gas work, compressor replacement, certain motor issues).

Common Causes & Fixes

1. Brand-specific diagnosis

Error codes are model-specific. Always look up YOUR exact brand and model number.

2. Temporary reset

Unplug for 5 minutes, plug back in. Many codes clear on their own.

3. Underlying issue

Error codes rarely come alone — fix the root cause (vent clog, bad sensor, etc.)

🛠️ When to Call a Professional

Call a pro if:

🚨 You smell gas — leave the house immediately
💨 The dryer sparks or trips the breaker constantly
🔌 You’re not comfortable working around 240V electricity
🔥 You found signs of overheating or burning
Your dryer is under warranty — DIY repairs may void it

DIY is fine for:

Replacing door switches, thermal fuses, belts, rollers
Cleaning vents, lint filters, moisture sensors
Visual inspections of heating elements and igniters
Error code research and simple resets

Pro Tips to Keep Your Dryer Happy

Clean the lint filter before EVERY load. Seriously.
Check the outside vent monthly — feel the airflow.
Don’t overload. Half-full max.
Use dryer sheets sparingly. They clog sensors.
Annual vent cleaning — hire a pro or do it yourself with a brush kit.

Last updated: October 2026. This content is for informational purposes only and does not constitute professional repair advice.